Finding Ways To Keep Up With Tips

A Guide to Wood Science

Wood science is the study of wood as a material that is renewable and of biological origin. Wood technology is now the way the tools are utilized in the processes of wood preservation. Wood is treated as a material in direct comparison with other products. Materials properties, ease of it being worked on and its value are among the few properties which are compared against those of wood and other materials. The many Merits of timber and these technologies improve wood to be superior over other products. Wood can be applied in very many applications, and this gives it an upper hand over other materials. Wood is renewable, and this makes it more precious. The other merit is that a part of the harvested material is at the same time used as energy to produce the product.

Protection of wooden structure and products is a must if you want to keep the good looks in place. The biggest threat to wood being moisture and insects has to be kept away from the wood. The moisture courses the timber to decay and the insects eat through the wood. Alkaline copper Quaternary or the ACQ has turned out to be a very effective way wood preservation. This is a copper-based preservative that is applied to the wood for protection. Although being a good method to use for wood protection it has presents some few challenges. The chemical is highly corrosive to most metals, the chemical corrodes away galvanized fasteners and therefore only stainless steel is used. The concentration of the chemical that will be used to treat a piece of wood will depend on the where it is going to be used and the molecular structure of the wood. The concentration level of the chemical will be different for two pieces of wood where one is used above ground and the other close to a water body.

The use of copper metal is another method of wood treatment that is fast being accepted. The use of this method is fast being accepted because it is not corroding the metal fasteners. This process is what in other words called the micronized copper wood preservative. A high-pressure liquid that has the copper metal mixed in it is driven into the wood. The process eliminates the need to dissolve the copper as is done in earlier copper-based preservatives. When this process is used to treat timber the timber properties are increased highly. The wood products protected using this method last longer.

Termites and fungal decay are just a few among the many problems wood treated from this method are protected against. It is not corrosive to metals used in together with the product. When you use this method to treat wood, then you will not need to worry for at least ten years.